Wireless Feeder Controllers

The X Series Wireless Feeder Controller was something we came out with a couple years ago. Basically, it gives the BuckEye Cam users the ability to connect all their feeders wirelessly to their X Series Network Manager Software.

The Wireless feeder controller can easily be wired up to most spin type feeders and added to the wireless network within minutes. The wireless feeder controller can operate on either 6V or 12V systems.

actuator_wiring1
Wiring up the Wireless Feeder Controller

The X80 Wireless Feeder Controller can replace the standard timer on most commonly available deer feeder kits.
This will allow the feeder to be controlled and monitored wirelessly from several miles away using the Buckeye Cam X-Series Network Manager software application and a base receiver connected to a computer. Using X-Series Network Manager, the daily feed schedule may be modified at any time and wirelessly transmitted to the feeder. The feeder can also send you status alerts for low battery, blown fuse, jammed motor, or empty feeder.
Up to 254 feeders can be controlled and monitored from a single base.

The wireless feeders are one of the more popular wireless option as it can literally save you money in feed as well as time. They also give you piece of mind with positive feedback. And lastly they can be used as repeaters for other X series devices in the field as well.

 

Leave a Reply

Your email address will not be published.